HSE Question Bank
for Exam preparation

HSE- Q2. How do industrial pollution results in water pollution?

1. Dumping of various waste products from industries
2. Taking water bodies places to built industries
3. Industries which uses all the water from the water bodies and cause scarcity of water
4. Building of purification unit in the industrie

HSE- Q3. According to ISO 14001, the Environment is the surroundings in which an organization operates, including ___________ and their interrelationships

1. air, water, land, natural resources, flora, fauna, humans
2. management, system, materials, machines
3. low, regulations, roles, instructions
4. none of the above

HSE- Q4. Changing the way people work is done through ____________

1. Use of PPE
2. Engineering controls
3. Elimination
4. Adding PPE to the work area

HSE- Q5. The acronym “PASS” used for fire extinguisher operation stands for:

1. Pick up, Aim, Squeeze, Squirt
2. Push, Alarm, Swirl, Sweep
3. Pull, Aim, Squeeze, Sweep
4. Pull, Aim, Swirl, Swat

HSE- Q6. Measuring BOD (biological oxygen demand) is primarily used for

1. Estimating the types of microbes
2. Determine the level of dissolved oxygen
3. Estimating the quantity of organic matter in sewage water
4. None of the above

HSE- Q7. If you transfer chemicals from a labeled container to a portable container, you don’t need to comply with standard hazardous material labeling requirements when:

1. You hand the container off to someone else
2. You leave the work area before using the materials
3. You don’t use the materials before the end of your work shift
4. None of the above

HSE- Q8. Environmental _____ are the “effects” on the environment caused by the environmental _____.

1. changes, evolution
2. aspects, impacts
3. targets, objectives
4. impacts, aspects

HSE- Q9. Which of the following is not true about powder-actuated tools?

1. If a powder-actuated tool misfires, you should try to fire it again immediately.
2. They are so dangerous they can only be powered by specially trained employees.
3. They should never be loaded unless they are being used immediately.
4. They require two separate motions for firing -- one to bring to tool into position and another to pull the trigger.

HSE- Q10. Modifying a design is an example ___________

1. Substitution
2. Elimination
3. Engineering control
4. Administrative control