Quality Question Bank
for Exam preparation

Q2. Operational Definitions provide:

1. A clear, precise description of the factor being measured
2. All of the above
3. A definition of the type of data to be collected
4. A statistically valid sample size

Q3. The chart used for tracking number non-conforming is:

1. P
2. Np
3. X bar
4. None of the above

Q4. The Risk Priority Number (RPN) in an FMEA exercise is derived from...

1. severity x occurrence x risk
2. severity x occurrence x risk
3. occurrence x detection x control
4. severity x occurrence x detection

Q5. A six sigma capable process will have

1. Cp = 1.5, Cpk = 2.0 and DPMO = 3.4
2. Cp = 2.0, Cpk = 1.5 and DPMO = 6
3. Cp = 1.5 Cpk = 2.0 and DPMO = 6
4. Cp = 2.0, Cpk = 1.5 and DPMO = 3.4

Q6. In a six sigma improvement project the least experienced individuals are:

1. Red Belts
2. Master Black Belts
3. Green Belt
4. Black belts

Q7. the job characteristic of quality professionals is:

1. None of the above
2. Educating others
3. Achieving personal targets
4. Consultative work with other departments

Q8. Process capability ratio is expressed as:

1. USL+LSL/6s
2. USL-LSL/6s
3. USL-LSL/3s
4. USL-LSL/s

Q9. The pattern of continuous movement in one direction in a control chart is termed as:

1. Mixture
2. Cyclic Pattern
3. Trend
4. Stratification

Q10. Which type of OEE category does component jam is classified into?

1. Quality loss
2. Downtime loss
3. Speed Loss
4. Depends upon the duration of component jam